Page 2 - MPD IG480RW Datasheet
P. 2



www.micropowerdirect.comww.micropowerdirect.com.micropowerdirect.com
Model Selection Guide w www
Input (Supply) Output 1 Output 2 Output
Model Capacitive Effi ciency Fuse Rating
Number Voltage (VDC) Current (mA) Volt. (VDC) Current (mA) Volt. (VDC) Current (mA) Load (%) Slow-Blow
(mA)
Nom. Range Max. No-Load Max-Load Nominal Max. Min. Nominal Max. Min. (µF Max)
IG480-12RW 12 9.0 - 18.0 20.0 16.0 471.0 15.0 200.0 10.0 -9.0 -200.0 -10.0 1,000 85 1,000
IG480-24RW 24 18.0 - 36.0 40.0 8.0 235.0 15.0 200.0 10.0 -9.0 -200.0 -10.0 1,000 85 750

Notes:
1. The input voltage should not exceed the max value given in the table
above. Damage to the unit could occur.
2. When measuring output ripple, it is recommended that an external
0.1 µF ceramic capacitor be placed in parallel with a 10 µF electro-
lytic capacitor from each output to common. The IG120 series is designed to
3. Transient recovery is measured to within a 1% error band for a 75-100%
load change. power IGD962 type IGBT drivers.
4. To meet the requirements of EN 55022, external fi ltering components are Contact the factory for more information
required on the input. See page four for more information.
5. To meet the requirements of EN 61000-4-4 and EN 61000-4-5, external
components are required on the input. See page four for more information.
6. Operation at no-load will not damage these units. However, they may not
meet all specifi cations. It is not recommended that the units be operated
with a load under 5%.
7. It is recommended that a fuse be used on the input of a power supply for
protection. See the Model Selection table above for the correct rating.



Effi ciency vs Input Voltage 12 VDC Input Effi ciency vs Output Load 12 VDC Input

























Effi ciency vs Input Voltage 24 VDC Input Effi ciency vs Output Load 24 VDC Input


























MicroPower Direct • 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com
   1   2   3   4   5