Page 1 - MPD IG480RW Datasheet
P. 1





IG480RWSeries



High Isolation

IGBT Driver

DC/DC Con vert ers


Electrical Specifi cations
Specifi cations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice.
Key Features: Input
Parameter Conditions Min. Typ. Max. Units
• Operates With xx962 Drivers
IG480-12W 9 12 18
• 4.8W Output Power Input Voltage Range VDC
IG480-24W 18 24 36
• Independent Outputs IG480-12W 9.0
Input Start Voltage VDC
• 3,000 VDC Isolation IG480-24W 18.0
• Miniature DIP Case Input Filter Capacitor Filter
Output
• >1.0 MHour MTBF
Parameter Conditions Min. Typ. Max. Units
• Short Circuit Protection
+15V Output (1) ±1.0 ±2.0
• Overvoltage Protection Output Voltage Accuracy -9V Output (2) ±3.0 ±5.0 %
Line Regulation For VIN Change of Min to Max ±0.2 ±0.5 %
Load Regulation For IOUT Change of 5% to 100% ±0.5 ±1.0 %
Ripple & Noise (20 MHz), See Note 2 100 200 mV P-P
The IG480 series is Transient Recovery Time, See Note 3 25% Load Change 0.5 2.0 µS
designed to operate with Transient Response Deviation ±2.5 ±5.0 %
the IGD962 IGBT driver. Temperature Coeffi cient ±0.03 %/°C
Output Overvoltage Protection 110 120 140 %VOUT
Output Short Circuit Continuous (Autorecovery)
General
Parameter Conditions Min. Typ. Max. Units
Isolation Voltage 60 Seconds 3,000 VDC
Isolation Resistance 500 VDC 1,000 M
Isolation Capacitance 100 kHz/0.1V 100 pF
Switching Frequency 300 kHz
EMI Characteristics
Parameter Standard Criteria Level
Radiated Emissions, See Note 4 EN 55022 Class A
Conducted Emissions, See Note 4 EN 55022 Class A
ESD EN 61000-4-2 B ±4 kV Contact
RS EN 61000-4-3 A 10V/m
EFT, See Note 5 EN 61000-4-4 B ±2 kV
Surge, See Note 5 EN 61000-4-5 B ±2 kV
CS EN 61000-4-6 A 3 Vrms
Voltage Dips EN 61000-4-29 B 0% - 70%
Environmental
Parameter Conditions Min. Typ. Max. Units
Operating Temperature Range Ambient -40 +25 +85 ºC
Storage Temperature Range -55 +125 ºC
Cooling Free Air Convection
MicroPower Direct Humidity RH, Non-condensing 95 %
292 Page Street Physical
Suite D Case Size See Mechanical Diagram (Page 5)
Stoughton, MA 02072 Case Material Non-Conductive Black Plastic (UL94-V0)
USA Weight 0.496 Oz (14.0g)
Reliability Specifi cations
T: (781) 344-8226 Parameter Conditions Min. Typ. Max. Units
F: (781) 344-8481 MTBF MIL HDBK 217F, 25ºC, Gnd Benign 1.0 MHours
E: sales@micropowerdirect.com Absolute Maximum Ratings
W: www.micropowerdirect.com Parameter Conditions Min. Typ. Max. Units
IG480-12RW 25
Input Surge Voltage (1 Sec) VDC
IG480-24RW 50
Lead Temperature 1.5 mm From Case For 10 Sec 300 ºC
Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings.
www.micropowerdirect.com
   1   2   3   4   5