Page 2 - MPD IG275-xxE Datasheet
P. 2



www.micropowerdirect.comww.micropowerdirect.com.micropowerdirect.com
Model Selection Guide w www
Input (Supply) Output 1 Output 2
Fuse
Model Rating
Number Voltage (VDC) Current (mA) Voltage (VDC) Current (mA) Voltage (VDC) Current (mA) Slow-Blow
Nom. Range Full Load No Load Min. Nom. Max. Max Min Min. Nom. Max. Max Min (mA)
IG275-12E 12 11.40 - 12.60 280 40 14.25 15.0 15.75 120.0 12.0 -6.40 -8.00 -9.60 -120.0 -12.0 500
IG275-15E 15 14.25 - 15.75 230 35 14.25 15.0 15.75 120.0 12.0 -6.40 -8.00 -9.60 -120.0 -12.0 500
IG275-24E 24 22.80 - 25.20 144 30 14.25 15.0 15.75 120.0 12.0 -6.40 -8.00 -9.60 -120.0 -12.0 300

Notes:
1. Output voltage accuracy is measured with an output load of 100 mA. The output
accuracy over the output load range of 10% to 100% is given in the graphs below. The IG275E series is designed to
2. Load regulation is measured from 10% load to full load. operate with the IGD962 IGBT driver.
3. When measuring output ripple & noise, it is recommended that an external capacitor (1 µF to For more information on the IG962 or
10 µF) be placed from each output to common.
4. Operation at no-load will not damage these units. However, they may not meet all other IGBT/SiC drivers and DC/DC’s
specifi cations. Please Contact the factory for go to the
5. It is recommended that a fuse be used on the input of a power supply for protection. MicroPower Direct website
See the Model Selection table above for the correct rating.


Output Voltage Tolerance: Positive Output Output Voltage Tolerance: Negative Output

































Effi ciency vs Input Voltage 12 VDC Input Effi ciency vs Output Load 12 VDC Input
























MicroPower Direct • 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com
   1   2   3   4