Page 1 - MPD IG275-xxE Datasheet
P. 1





IG275-xxE Series



High Isolation

IGBT Driver

DC/DC Con vert ers


Electrical Specifi cations
Specifi cations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice.
Key Features: Input
Parameter Conditions Min. Typ. Max. Units
• Operates With xx962 Drivers
Supply Voltage Range See Model Selection Guide
• Independent Outputs
Input Filter Internal Capacitor
• 3,000 VAC Isolation
Output
• Miniature SIP Case
Parameter Conditions Min. Typ. Max. Units
• Ultra Low Iso. Capacitance Positive Output -5 +5
Output Voltage Accuracy, See Note 1 %
• >3.5 MHour MTBF Negative Output -20 +20
• Three Standard Models Positive Output -5 +5
Line Regulation, VIN = Min To Max %
• Low Cost Negative Output -20 +20
Positive Output 8 15
Load Regulation, See Note 2 %
Negative Output 10 15
Capacitive Load 1,000 µF
Ripple & Noise (20 MHz) See Note 3 100 200 mV P - P
Effi ciency 81 %
Temperature Coeffi cient ±0.03 %/ºC
Output Short Circuit Momentary (1.0 Sec)
General
Parameter Conditions Min. Typ. Max. Units
Isolation Voltage 60 Seconds 3,000 VAC
Isolation Resistance 500 VDC 1,000 M
Isolation Capacitance, 100 kHz/0.1V 6 10 pF
Switching Frequency 100 300 kHz
EMI Characteristics
Parameter Standard Criteria Level
Radiated Emissions, See Note 3, Pg 3 EN 55022 Class B
Conducted Emissions, See Note 3, Pg 3 EN 55022 Class B
ESD EN 61000-4-2 B ±8 kV Contact
EFT EN 61000-4-4 B ±2 kV
Surge EN 61000-4-5 B ±2 kV
Environmental
Parameter Conditions Min. Typ. Max. Units
Operating Temperature Range Ambient -40 +25 +105 ºC
Storage Temperature Range -55 +125 ºC
Cooling Free Air Convection
Humidity RH, Non-condensing 95 %
Physical
Case Size See Mechanical Diagram (Page 4)
MicroPower Direct Case Material Non-Conductive Black Plastic (UL94-V0)
292 Page Street Weight 0.152 Oz (4.3g)
Suite D
Stoughton, MA 02072 Reliability Specifi cations
USA Parameter Conditions Min. Typ. Max. Units
MTBF MIL HDBK 217F, 25ºC, Gnd Benign 3.5 MHours
T: (781) 344-8226 Absolute Maximum Ratings
F: (781) 344-8481 Parameter Conditions Min. Typ. Max. Units
E: sales@micropowerdirect.com IG275-12E 14
W: www.micropowerdirect.com Max Supply Voltage (1 Sec) IG275-15E 16 VDC
IG275-24E 26
Lead Temperature 1.5 mm From Case For 10 Sec 300 ºC
Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings.

www.micropowerdirect.com
   1   2   3   4