Page 1 - MPD IG220-xx Datasheet
P. 1





IG220 Series



High Isolation

SiC Drivers

DC/DC Con vert ers


Electrical Specifi cations
Specifi cations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice.
Key Features: Input
Parameter Conditions Min. Typ. Max. Units
• +20/-4 VDC Outputs
Supply Voltage Range See Model Selection Guide
• 83% Effi ciency Input Filter Internal Capacitor
• -40°C to 105°C Operation Output
• 3,500 VAC Isolation Parameter Conditions Min. Typ. Max. Units
• Miniature SIP Case 12 VIN ±1.5 ±2.0
Line Regulation, See Note 1 15 VIN ±1.4 ±2.0 %
• >3.5 MHour MTBF
24 VIN ±1.1 ±1.3
• Short Circuit Protection
20 VOUT -- 8.0
IG220-12
-4 VOUT -- 13.0
18 VOUT 7.0 11.0
Load Regulation, See Note 2 IG220-15 %
-3 VOUT 6.0 10.0
20 VOUT 5.0 8.0
IG220-24
-4 VOUT 10.0 13.0
20 VOUT 60
Ripple & Noise (20 MHz), See Note 3 mV P - P
-4 VOUT 75
Capacitive Load 220 µF
IG220-12 80
Effi ciency %
IG220-15, IG220-24 83
Temperature Coeffi cient ±0.03 %/ºC
Output Short Circuit Continuous (Autorecovery)
General
Parameter Conditions Min. Typ. Max. Units
Isolation Voltage 60 Seconds 3,500 VAC
Isolation Resistance 500 VDC 1,000 M
Isolation Capacitance 100 kHz/0.1V 3.5 pF
Switching Frequency 100 kHz
EMI Characteristics
Parameter Standard Criteria Level
Radiated Emissions, See Note 4 EN 55022 Class B
Conducted Emissions, See Note 4 EN 55022 Class B
ESD EN 61000-4-2 B ±6 kV Contact
Environmental
Parameter Conditions Min. Typ. Max. Units
Operating Temperature Range Ambient -40 +25 +105 ºC
IG220-12 -50 +125
Storage Temperature Range ºC
IG220-15, IG220-24 -55 +125
Cooling Free Air Convection
Humidity RH, Non-condensing 95 %
MicroPower Direct Physical
292 Page Street Case Size See Mechanical Diagram (Page 4)
Suite D Case Material Non-Conductive Black Plastic (UL94-V0)
Stoughton, MA 02072 Weight 0.152 Oz (4.3g)
USA
Reliability Specifi cations
Parameter Conditions Min. Typ. Max. Units
T: (781) 344-8226
F: (781) 344-8481 MTBF MIL HDBK 217F, 25ºC, Gnd Benign 3.5 MHours
E: sales@micropowerdirect.com Absolute Maximum Ratings
Parameter Conditions Min. Typ. Max. Units
W: www.micropowerdirect.com
12 VIN 21
Max Supply Voltage (1 Sec) 15 VIN 21 VDC
24 VIN 30
Lead Temperature 1.5 mm From Case For 10 Sec 300 ºC
Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings.
www.micropowerdirect.com
   1   2   3   4