Page 1 - MPD ML200x Datasheet
P. 1





ML200x Series



Ultra-Miniature, 2W

Single & Dual SMT

DC/DC Con vert ers


Electrical Specifi cations
Specifi cations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice.
Input
Key Features: Parameter Conditions Min. Typ. Max. Units
• 2W Output Power 5 VDC Input 4.5 5.0 5.5
• Ultra-Miniature SMT Case Input Voltage Range 12 VDC Input 10.8 12.0 13.2 VDC
• 1,500 VDC Isolation 24 VDC Input 21.6 24.0 26.4
• Single And Dual Outputs Reverse Polarity Input Current 0.3 A
Input Filter Capacitor
• 5V, 12, & 24V Inputs
Output
• -40ºC to +85ºC Operation
Parameter Conditions Min. Typ. Max. Units
• 16 Standard Models
Output Voltage Accuracy ±5.0 %
• 2.0 MH MTBF Minimum Output Voltage Balance Dual Outputs, Balanced Loads ±0.1 ±1.0 %
• Available on Tape/Reel Line Regulation For VIN Change of 1% ±1.2 ±1.5 %
Load Regulation, See Note 2 See Model Selection Guide
Ripple & Noise (20 MHz) See Note 3 120 mV P - P
Temperature Coeffi cient ±0.01 ±0.02 %/ºC
Output Short Circuit Momentary (0.5 Sec.)
General
Parameter Conditions Min. Typ. Max. Units
Isolation Voltage 60 Seconds 1,500 VDC
Isolation Resistance 500 VDC 1,000 M
Isolation Capacitance 100 kHz, 1V 60 100 pF
Switching Frequency 50 100 120 kHz
Environmental
Parameter Conditions Min. Typ. Max. Units
Operating Temperature Range Ambient -40 +25 +85 ºC
Maximum Case Temperature Case +90 ºC
Storage Temperature Range -50 +125 ºC
Cooling Free Air Convection
Humidity RH, Non-condensing 95 %
Physical
Case Size See Mechanical Drawings (Page 3)
Case Material Non-Conductive Black Plastic (UL94-V0)
Single Output Models 0.05 Oz (1.5g)
Weight
Dual Output Models 0.08 Oz (2.2g)
Reliability Specifi cations
MicroPower Direct Parameter Conditions Min. Typ. Max. Units
292 Page Street MTBF MIL HDBK 217F, 25ºC, Gnd Benign 2.0 MHours
Suite D Moisture Sensitivity Level (MSL) IPC/JEDEC J-STD-020D.1 Level 2
Stoughton, MA 02072 Absolute Maximum Ratings
USA
Parameter Conditions Min. Typ. Max. Units
5 VDC Input 9.0
T: (781) 344-8226
F: (781) 344-8481 Input Voltage Surge (1 Sec) 12 VDC Input 18.0 VDC
E: sales@micropowerdirect.com 24 VDC Input 30.0
W: www.micropowerdirect.com Peak Refl ow Temperature See “Refl ow Settings Page 2 245 ºC
Lead Temperature 1.5 mm From Case For 10 Sec. 300 ºC
Internal Power Dissipation All Models 650 mW
Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings.

www.micropowerdirect.com
   1   2   3   4   5