Page 1 - MPD ML200SE Datasheet
P. 1





ML200SE Series



2W, Single Output

Ultra-Miniature SMT

DC/DC Con vert ers


Electrical Specifi cations
Specifi cations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice.
Input
Key Features:
Parameter Conditions Min. Typ. Max. Units
• 2W Output Power 5 VDC Input 4.5 5.0 5.5
• Ultra-Miniature SMT Case 12 VDC Input 10.8 12.0 13.2
Input Voltage Range VDC
• 1,500 VDC Isolation 15 VDC Input 13.5 15.0 16.5
• Single Output 24 VDC Input 21.6 24.0 26.4
• -40°C to +105°C Operation Input Filter Capacitor
Output
• >3.5 MHour MTBF
Parameter Conditions Min. Typ. Max. Units
• 16 Standard Models
Output Voltage Accuracy ±3.0 %
• LOW COST!
Capacitive Load 220 µF
3.3 VOUT Models ±1.5
Line Regulation For Vin Change of 1% %
All Other Models ±1.2
Load Regulation, See Note 1 See Model Selection Guide
24V Output Models 100 200
Ripple & Noise (20 MHz), See Note 2 mV P - P
All Other Models 100 150
Temperature Coeffi cient ±0.03 %/ºC
Output Short Circuit Momentary (1S Max)
General
Parameter Conditions Min. Typ. Max. Units
Isolation Voltage 60 Seconds 1,500 VDC
Isolation Resistance 500 VDC 1,000 M
Isolation Capacitance 100 kHz, 0.1V 20 pF
Switching Frequency 100 300 kHz
EMI Characteristics
Parameter Standard Criteria Level
Radiated Emissions EN 55022 B
Conducted Emissions EN 55022 B
ESD EN 61000-4-2 B ±8kV
Environmental
Parameter Conditions Min. Typ. Max. Units
Operating Temperature Range Ambient -40 +25 +105 ºC
Storage Temperature Range -55 +125 ºC
Cooling Free Air Convection
Humidity RH, Non-condensing 95 %
Physical
Case Size See Mechanical Drawing (Page 2)
Case Material Non-Conductive Black Plastic (UL94-V0)
MicroPower Direct
Weight 0.05 Oz (1.52g)
292 Page Street
Suite D Reliability Specifi cations
Stoughton, MA 02072 Parameter Conditions Min. Typ. Max. Units
USA MTBF MIL HDBK 217F, 25ºC, Gnd Benign 3.5 MHours
Absolute Maximum Ratings
T: (781) 344-8226 Parameter Conditions Min. Typ. Max. Units
F: (781) 344-8481 5 VDC Input 9.0
E: sales@micropowerdirect.com 12 VDC Input 18.0
W: www.micropowerdirect.com Input Voltage Surge (1 Sec) VDC
15 VDC Input 21.0
24 VDC Input 30.0
Peak Refl ow Temperature See Note 5 245 ºC
Lead Temperature 1.5 mm From Case For 10 Sec 300 ºC
Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings.
www.micropowerdirect.com
   1   2