Page 1 - MPD MH100S Datasheet
P. 1





MH100S Series



Low Cost, 1W

Ultra-Miniature DIP

DC/DC Con vert ers


Electrical Specifi cations
Specifi cations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice.
Key Features: Input
Parameter Conditions Min. Typ. Max. Units
• 1W Output Power
3.3 VDC Input 2.97 3.3 3.63
• Ultra-Miniature DIP Case 5 VDC Input 4.50 5.0 5.50
Input Voltage Range 12 VDC Input 10.80 12.0 13.20 VDC
• 28 Standard Models
24 VDC Input 21.60 24.0 26.40
• 1,000 VDC Isolation 48 VDC Input 43.20 48.0 52.80
Input Refl ected Ripple Current 20 mA P - P
• >1.1 MHour MTBF
Input Filter Internal Capacitor
• -40°C to +85°C Operation Output
Parameter Conditions Min. Typ. Max. Units
Output Voltage Accuracy ±3.0 %
Line Regulation For VIN Change of 1% ±1.2 %
Load Regulation, See Note 1 See Model Selection Guide
Ripple & Noise (20 MHz) See Note 2 100 mV P - P
Temperature Coeffi cient ±0.02 %/°C
Output Short Circuit Momentary (0.5 Sec.)
General
Parameter Conditions Min. Typ. Max. Units
Isolation Voltage 60 Seconds 1,000 VDC
Isolation Resistance 1,000 M
Isolation Capacitance 60 pF
Switching Frequency 80 kHz
EMI Characteristics
Parameter Conditions Criteria Level
Radiated Emissions EN 55022 Class A
Conducted Emissions See Note 3 EN 55022 Class A
ESD EN 61000-4-2 A ±6 kV/±8kV
RS EN 61000-4-3 A 10V/m
EFT See Note 3 EN 61000-4-4 A ±2 kV
Surge See Note 3 EN 61000-4-5 A ±2 kV
CS EN 61000-4-6 A 10 Vrms
PFMF EN 61000-4-8 A 1A/m
Environmental
Parameter Conditions Min. Typ. Max. Units
Ambient -40 +85
Operating Temperature Range °C
Case +100
Storage Temperature Range -40 +125 °C
Cooling Free Air Convection
Humidity RH, Non-condensing 95 %
Physical
Case Size See Mechanical Diagram (Page 2)
Case Material Non-Conductive Black Plastic (UL-94V0)
MicroPower Direct Weight 0.06 Oz (1.8g)
292 Page Street Reliability Specifi cations
Suite D Parameter Conditions Min. Typ. Max. Units
Stoughton, MA 02072 MTBF MIL HDBK 217F, 25°C, Gnd Benign 1.121 MHours
USA
Absolute Maximum Ratings
Parameter Conditions Min. Typ. Max. Units
T: (781) 344-8226 3.3 VDC Input 6.0
F: (781) 344-8481 5 VDC Input 7.0
E: sales@micropowerdirect.com
Input Voltage Surge (1 Sec) 12 VDC Input 15.0 VDC
W: www.micropowerdirect.com
24 VDC Input 28.0
48 VDC Input 54.0
Lead Temperature 1.5 mm From Case For 10 Sec 260 °C
Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings.

www.micropowerdirect.com
   1   2