Page 2 - MPD MD600RWI Datasheet
P. 2



Model Selection Guide www.micropowerdirect.com
Input Output Fuse
Model Effi ciency Capacitive Rating
Load
Number Voltage (VDC) Current (mA) Voltage Current Current (%, Typ) (µF, Max) Slow-Blow
Nominal Range Full-Load No-Load (VDC) (mA, Max) (mA, Min) (mA)
MD605S-03RWI 5 4.5 - 9.0 1,144 105 3.3 1,300 0.0 75 6,600 3,000
MD605S-05RWI 5 4.5 - 9.0 1,519 105 5.0 1,200 0.0 79 3,300 3,000
MD605S-09RWi 5 4.5 - 9.0 1,445 105 9.0 666 0.0 83 2,000 3,000
MD605S-12RWI 5 4.5 - 9.0 1,428 105 12.0 500 0.0 84 1,600 3,000
MD605S-15RWI 5 4.5 - 9.0 1,428 105 15.0 400 0.0 84 1,400 3,000
MD605S-24RWI 5 4.5 - 9.0 1,428 105 24.0 250 0.0 84 680 3,000
MD605D-05RWI 5 4.5 - 9.0 1,481 105 ±5.0 ±600 0.0 81 ±2,000 3,000
MD605D-12RWI 5 4.5 - 9.0 1,428 105 ±12.0 ±250 0.0 84 ±900 3,000
MD605D-15RWI 5 4.5 - 9.0 1,428 105 ±15.0 ±200 0.0 84 ±660 3,000
MD612S-03RWI 12 9.0 - 18.0 470 55 3.3 1,300 0.0 76 6,600 1,250
MD612S-05RWI 12 9.0 - 18.0 602 55 5.0 1,200 0.0 83 3,300 1,250
MD612S-09RWI 12 9.0 - 18.0 595 55 9.0 666 0.0 84 2,000 1,250
MD612S-12RWI 12 9.0 - 18.0 588 55 12.0 500 0.0 85 1,600 1,250
MD612S-15RWI 12 9.0 - 18.0 588 55 15.0 400 0.0 85 1,400 1,250
MD612S-24RWI 12 9.0 - 18.0 581 55 24.0 250 0.0 86 680 1,250
MD612D-05RWI 12 9.0 - 18.0 609 55 ±5.0 ±600 0.0 82 ±2,000 1,250
MD612D-12RWI 12 9.0 - 18.0 595 55 ±12.0 ±250 0.0 84 ±900 1,250
MD612D-15RWI 12 9.0 - 18.0 581 55 ±15.0 ±200 0.0 86 ±660 1,250
MD624S-03RWI 24 18.0 - 36.0 229 30 3.3 1,300 0.0 78 6,600 750
MD624S-05RWI 24 18.0 - 36.0 301 30 5.0 1,200 0.0 83 3,300 750
MD624S-09RWI 24 18.0 - 36.0 294 30 9.0 666 0.0 85 2,000 750
MD624S-12RWI 24 18.0 - 36.0 294 30 12.0 500 0.0 85 1,600 750
MD624S-15RWI 24 18.0 - 36.0 287 30 15.0 400 0.0 87 1,400 750
MD624S-24RWI 24 18.0 - 36.0 287 30 24.0 250 0.0 87 680 750
MD624D-05RWI 24 18.0 - 36.0 304 30 ±5.0 ±600 0.0 82 ±2,000 750
MD624D-12RWI 24 18.0 - 36.0 297 30 ±12.0 ±250 0.0 84 ±900 750
MD624D-15RWI 24 18.0 - 36.0 297 30 ±15.0 ±200 0.0 84 ±660 750
MD648S-03RWI 48 36.0 - 75.0 117 15 3.3 1,300 0.0 76 6,600 300
MD648S-05RWI 48 36.0 - 75.0 156 15 5.0 1,200 0.0 80 3,300 300
MD648S-09RWI 48 36.0 - 75.0 147 15 9.0 666 0.0 85 2,000 300
MD648S-12RWI 48 36.0 - 75.0 149 15 12.0 500 0.0 84 1,600 300
MD648S-15RWI 48 36.0 - 75.0 145 15 15.0 400 0.0 86 1,400 300
MD648S-24RWI 48 36.0 - 75.0 148 15 24.0 250 0.0 84 680 300
MD648D-05RWI 48 36.0 - 75.0 152 15 ±5.0 ±600 0.0 82 ±2,000 300
MD648D-12RWI 48 36.0 - 75.0 147 15 ±12.0 ±250 0.0 85 ±900 300
MD648D-15RWI 48 36.0 - 75.0 147 15 ±15.0 ±200 0.0 85 ±660 300

For Remote Control option, add suffi x “R” to Derating Curve
model number (i.e. MD624S-05RWI-R)
Notes:
1. Start up time is specifi ed at nominal input and with a constant resistive
load.
2. Cross regulation is measured by monitoring one output set at 100% load
while varying the second output from 25% to 100% load.
3. When measuring output ripple & noise, it is recommended that an external
ceramic capacitor (0.1 µF typ.) be placed from the +VOUT to the -VOUT pins for
single output units and from each output to common for dual output models.
4. Transient recovery is measured to within a 1% error band for a load step
change of 25%.
5. Free air convection is typically 30 - 65 LFM. THe units should not be operated
in still air (0 LFM).
6. Exceeding the absollute ratings could damage the unit.
7. It is recommended that a fuse be used on the input of a power supply for protection.
See the Model Selection table above for the correct rating.





292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com
   1   2   3   4