Page 1 - MPD MD600RWI Datasheet
P. 1



MD600xRWI Series





2:1 Input, SIP,

High Isolation, 6W


DC/DC Con vert ers

Electrical Specifi cations
Specifi cations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice.
Key Features: Input
Parameter Conditions Min. Typ. Max. Units
• 6W Output Power 5 VDC Input 4.5 5.0 9.0
12 VDC Input 9.0 12.0 18.0
• Miniature SIP Case Input Voltage Range VDC
24 VDC Input 18.0 24.0 36.0
• 2:1 Input Voltage Range 48 VDC Input 36.0 48.0 75.0
Input Refl ected Ripple Current 30 mA P - P
• 3,000 VDC Isolation
Start Up Time See Note 1 30 mS
• 36 Standard Models Input Filter Capacitor Filter
Output
• Short Circuit Protected
Parameter Conditions Min. Typ. Max. Units
• -40°C to +65°C Operation Output Voltage Accuracy ±1.0 %
Line Regulation VIN = Min to Max ±0.2 %
• Single & Dual Outputs
Load Regulation IOUT = 0% to 100% ±1.0 %
• Industry Standard Pin-Out Cross Regulation See Note 2 ±5.0 %
Ripple & Noise (20 MHz) See Note 3 75 mV P - P
Transient Recovery Time See Note 4 0.5 mSec
Transient Response Deviation ±3.0 %
Temperature Coeffi cient ±0.02 %/°C
Output Short Circuit Continuous (Autorecovery)
General
Parameter Conditions Min. Typ. Max. Units
Isolation Voltage 60 Seconds 3,000 VDC
Isolation Resistance 1.0 G
Isolation Capacitance 50 pF
Switching Frequency 100 kHz
EMI Characteristics
Parameter Standard Level
Radiated Emissions EN 55022 Class A
Conducted Emissions See Note 4 Pg 3 EN 55022 Class A
Criteria A; ±8 kV Air
ESD EN 61000-4-2
Criteria A; ±6 kV Contact
RS EN 61000-4-3 Criteria A; 10V/m
EFT See Note 6 Pg 3 EN 61000-4-4 Criteria A; ±2 kV
Surge See Note 6 Pg 3 EN 61000-4-5 Criteria A; ±1 kV
CS EN 61000-4-6 Criteria A; 10 Vrms
PFMF EN 61000-4-8 Criteria A; 1A/m
Environmental
Parameter Conditions Min. Typ. Max. Units
Operating Temperature Range Ambient -40 +25 +65 °C
Operating Temperature Range Case +105 °C
Storage Temperature Range -55 +125 °C
Cooling Free Air Convection
Humidity RH, Non-condensing 95 %
MicroPower Direct Physical
292 Page Street Case Size See Mechanical Drawing (Page 4)
Suite D Case Material Non-Conductive Black Plastic (UL94-V0)
Stoughton, MA 02072 Weight 0.166 Oz (4.8g)
USA Reliability Specifi cations
Parameter Conditions Min. Typ. Max. Units
T: (781) 344-8226 MTBF MIL HDBK 217F, 25°C, Gnd Benign 770 kHours
F: (781) 344-8481 Absolute Maximum Ratings
E: sales@micropowerdirect.com Parameter Conditions Min. Typ. Max. Units
W: www.micropowerdirect.com 5 VDC Input 15.0
12 VDC Input 25.0
Input Voltage Surge (1 Sec) VDC
24 VDC Input 50.0
48 VDC Input 100.0
Lead Temperature 1.5 mm From Case for 10 Sec 260 °C
Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings.
www.micropowerdirect.com
   1   2   3   4