Page 1 - MPD MD200xEI Datasheet
P. 1





MD200xEI Series



Low Cost, 2W

High Isolation SIP

DC/DC Con vert ers


Electrical Specifi cations
Specifi cations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice.
Key Features: Input
Parameter Conditions Min. Typ. Max. Units
• 2W Output Power 5 VDC Input 4.50 5.0 5.50
• Miniature SIP Case 12 VDC Input 10.80 12.0 13.20
Input Voltage Range VDC
• Short Circuit Protected 15 VDC Input 13.50 15.0 16.50
24 VDC Input 21.60 24.0 26.40
• 3,000 VDC Isolation
Input Filter Internal Capacitor
• EN 60950 Approved Output
• >3.5 MHour MTBF Parameter Conditions Min. Typ. Max. Units
3.3V/±3.3V output Models ±5.0
• -40°C to +105°C Operation Output Voltage Accuracy %
All Other Models ±2.5
• LOW COST 3.3 VDC Output ±1.5
Line Regulation For VIN Change of 1% %
All Other Outputs ±1.2
1.5 kV Isolation Load Regulation, See Note 3 See Model Selection Guide
Models Ripple & Noise (20 MHz) See Note 4 75 200 mV P - P
Available Temperature Coeffi cient ±0.03 %/°C
MD205x-24EI, MD224x-xxEI Models Momentary (1S)
Output Short Circuit, See Note 5
All Other Models Continuous (Autorecovery)
General
Parameter Conditions Min. Typ. Max. Units
Isolation Voltage 60 Seconds 3,000 VDC
Isolation Resistance 500 VDC 1,000 M
Isolation Capacitance, See Note 6 100 kHz, 1V 20 pF
Switching Frequency 100 kHz
EMI Characteristics
Parameter Standard Criteria Level
Radiated Emissions, See Page 3 EN 55022 Class B
Conducted Emissions, See Page 3 EN 55022 Class B
ESD, Single Output Models EN 61000-4-2 B Contact ±8 kV
ESD, Dual Output Models EN 61000-4-2 B Contact ±6 kV
Environmental
Parameter Conditions Min. Typ. Max. Units
Operating Temperature Range Ambient -40 +25 +105 °C
Storage Temperature Range -55 +125 °C
Cooling Free Air Convection
Humidity RH, Non-condensing 95 %
Physical
Case Size See Mechanical Dimensions (Page 4)
MicroPower Direct Case Material Non-Conductive Black Plastic (UL-94V0)
292 Page Street Weight 0.08 Oz (2.4g)
Suite D Reliability Specifi cations
Stoughton, MA 02072
Parameter Conditions Min. Typ. Max. Units
USA
MTBF MIL HDBK 217F, 25°C, Gnd Benign 3.5 MHours
Absolute Maximum Ratings
T: (781) 344-8226
F: (781) 344-8481 Parameter Conditions Min. Typ. Max. Units
E: sales@micropowerdirect.com 5 VDC Input 9.0
W: www.micropowerdirect.com 12 VDC Input 18.0
Input Voltage Surge (1 Sec) VDC
15 VDC Input 21.0
24 VDC Input 30.0
Lead Temperature 1.5 mm From Case For 10 Sec 300 °C
Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings.
www.micropowerdirect.com
   1   2   3   4