Page 1 - MPD MD100xEI Datasheet
P. 1





MD100xEI Series



Low Cost, 1W

High Isolation, SIP

DC/DC Con vert ers


Electrical Specifi cations
Specifi cations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice.
Key Features: Input
Parameter Conditions Min. Typ. Max. Units
• 1W Output Power 3.3 VDC Input 2.97 3.3 3.63
• Miniature SIP Case 5 VDC Input 4.50 5.0 5.50
9 VDC Input 8.10 9.0 9.90
• Short Circuit Protected Input Voltage Range VDC
12 VDC Input 10.80 12.0 13.20
• 3,000 VDC Isolation 15 VDC Input 13.50 15.0 16.50
• EN 60950 Approved 24 VDC Input 21.60 24.0 26.40
Input Filter Internal Capacitor
• >3.5 MHour MTBF Output
• -40 to +105°C Operation Parameter Conditions Min. Typ. Max. Units
3.3 VDC Output Models ±3.5
• LOW COST Output Voltage Accuracy %
All Other Models ±2.5
3.3 VOUT Models ±1.5
Line Regulation For VIN Change of 1% %
All Other Models ±1.2
1.5 kV Isolation Load Regulation, See Note 1 See Model Selection Guide
Models Ripple & Noise (20 MHz), See Note 2 Output Voltage <12 VDC 30 mV P - P
Available 15 VDC, 24 VDC Output 60
Temperature Coeffi cient ±0.03 %/°C
Output Short Circuit, See Note 3 Continuous (Autorecovery)
General
Parameter Conditions Min. Typ. Max. Units
Isolation Voltage 60 Seconds 3,000 VDC
Isolation Resistance 500 VDC 1,000 M
Isolation Capacitance 100 kHz, 0.1V 20 pF
Switching Frequency 100 300 kHz
EMI Characteristics
Parameter Standard Criteria Level
Radiated Emissions EN 55022 Level B
Conducted Emissions EN 55022 Level B
ESD, Single Output, See Note 4 EN 61000-4-2 B ±8 kV Contact
ESD, Dual Output, See Note 4 EN 61000-4-2 B ±6 kV Contact
Environmental
Parameter Conditions Min. Typ. Max. Units
Operating Temperature Range Ambient -40 +25 +105 °C
Storage Temperature Range -55 +125 °C
Cooling Free Air Convection
Humidity RH, Non-condensing 95 %
Physical
Case Size See Mechanical Diagram (Page 4)
Case Material Non-Conductive Black Plastic (UL-94V0)
MicroPower Direct
Weight 0.08 Oz (2.4g)
292 Page Street Reliability Specifi cations
Suite D
Parameter Conditions Min. Typ. Max. Units
Stoughton, MA 02072
MTBF MIL HDBK 217F, 25°C, Gnd Benign 3.5 MHours
USA
Absolute Maximum Ratings
Parameter Conditions Min. Typ. Max. Units
T: (781) 344-8226
F: (781) 344-8481 3.3 VDC Input 5.0
E: sales@micropowerdirect.com 5 VDC Input 9.0
W: www.micropowerdirect.com Input Voltage Surge (1 Sec) 5 VDC Input 12.0 VDC
12 VDC Input 18.0
15 VDC Input 21.0
24 VDC Input 30.0
Lead Temperature 1.5 mm From Case For 10 Sec 300 °C
Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings.
www.micropowerdirect.com
   1   2   3   4