Page 3 - MPD MD100xE Datasheet
P. 3



www.micropowerdirect.com
Typical Effi ciency vs Input, MD105D-05E Typical Effi ciency vs Input, MD124D-15E






















Typical Effi ciency vs Output, MD105D-05E Typical Effi ciency vs Output, MD124D-15E





















Effi ciency vs input is plotted with the unit at full load. Effi ciency vs output is plotted with the unit at nominal input.


Typical Connection, Single Output Models


VIN C1 L1 C2
3.3 VDC 4.7 µF/50V 6.8 µH ---
5 VDC 4.7 µF/50V 6.8 µH ---
9 VDC 4.7 µF/50V 6.8 µH ---
12 VDC 4.7 µF/50V 6.8 µH ---
15 VDC 4.7 µF/50V 6.8 µH 1.0 nF/2 kV
24 VDC 4.7 µF/50V 6.8 µH 1.0 nF/2 kV
Typical Connection, Dual Output Models VOUT C3 C4
3.3 VDC 10 µF ---
5.0 VDC 10 µF ---
9.0 VDC 2.2 µF ---
12 VDC 2.2 µF ---
15 VDC 1.0 µF ---
24 VDC 1.0 µF ---
±3.3 VDC 4.7 µF 4.7 µF
±5.0 VDC 4.7 µF 4.7 µF
±9.0 VDC 1.0 µF 1.0 µF
±12 VDC 1.0 µF 1.0 µF
±15 VDC 0.47 µF 0.47 µF
These converters are specifi ed for operation without external components. However, in some applications the addition of input/output capacitors ±24 VDC 0.47 µF 0.47 µF
will enhance stability and reduce output ripple. For applications that require meeting EMC standards, the diagrams above illustrates a typical
connection of the MD100x-xxE series. Suggested component values are given in the table at right.

Capacitors C2 and C3 are not required to meet specifi cations, but may be used if a lower level of output ripple is required.

MicroPower Direct • 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com
   1   2   3   4