Page 1 - MPD MPM-40 Datasheet
P. 1





MPM-40 Series



Board Mount, 40W


Single, Dual & Triple Out

AC/DC Power Supplies




Key Features: Electrical Specifi cations
Specifi cations typical @ +25°C, 230 VAC input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice.
• 40W Output Power
Input
• Universal 90-264 VAC Input Parameter Conditions Min. Typ. Max. Units
• EN 60950 Approved (UL) Input Voltage Range 90 264 VAC
100 375 VDC
• Meets IEC Safety Class II Input Frequency 47 440 Hz
• Industry Standard Pin-Out Input Current See Model Selection Guide
115 VAC 30.0
• Single, Dual & Triple Outputs Inrush Current A Pk
230 VAC 50.0
• Meets EN 55022 B EMI Meets CISPR Pub. 22/FCC Class B
• >200 kHour MTBF Output
Parameter Conditions Min. Typ. Max. Units
Output Voltage See Model Selection Guide
Chassis Mount Models
Output Current See Model Selection Guide
& DIN Rail Mount Output Voltage Accuracy See Note 1 ±2.0 %
Option Available! Line Regulation, See Note 2 VIN = Min to Max ±0.5 %
Load Regulation, Single Output IO = 1% to 100% ±1.0 %
Load Regulation, Dual Output, See Note 3 IO = 10% to 100% ±1.0 %
Load Regulation, Triple Output - Primary IO = 10% to 100% ±3.0 %
Load Regulation, Triple Output - Aux. IO = 10% to 100% ±7.0 %
Cross Regulation, Dual Output, See Note 4 IO = 15% to 100% ±5.0 %
Cross Regulation, Triple Output - Primary IO = 15% to 100% ±3.0 %
Cross Regulation, Triple Output - Aux. IO = 15% to 100% ±7.0 %
3.3 VDC Output 50.0 mVP-P
Ripple & Noise (20 MHz)
All Other Outputs 1.0 %VP-P of VO
Hold-Up Time 115 VAC 15 mSec
Temperature Coeffi cient ±0.02 %/°C
Over Temperature Protection Note 4 100 °C
Over Voltage Protection Zener Diode Clamp 120 % of VO
Short Circuit Protection, See Note 6 Continuous (Autorecovery)
Overload Protection 105 120 % of IO
General
Parameter Conditions Min. Typ. Max. Units
Isolation Voltage Input to Output 3,000 VAC
Isolation Resistance 500 VDC 100 M
EMI/RFI Conducted EN 55022 Level B
Electrostatic Discharge (ESD) EN 61000-4-2 Level B
RF Field Susceptibility EN 61000-4-3
EMC Compliance
Electrical Fast Transients/Bursts On Mains EN 61000-4-4 Level 3 2 kV
Surge EN 61000-4-5 Level 3 1kV/2 kV
Switching Frequency 132 kHz
Environmental
MicroPower Direct Parameter Conditions Min. Typ. Max. Units
292 Page Street Operating Temperature Range Ambient -40 +25 +70 °C
Suite D Operating Temperature Range Case +95 °C
Stoughton, MA 02072 Storage Temperature Range -40 +100 °C
USA Cooling Free Air Convection (See Derating Curve)
Humidity RH, Non-condensing 95 %
T: (781) 344-8226 Physical
F: (781) 344-8481 Case Size 3.50 x 2.50 x 0.98 Inches (89.0 x 63.5 x 25.0 mm)
E: sales@micropowerdirect.com Case Material Non-Conductive Plastic& Fiberglass (UL94-V0)
W: www.micropowerdirect.com Weight 9.85 Oz (280g)
Reliability Specifi cations
Parameter Conditions Min. Typ. Max. Units
MTBF MIL HDBK 217F, 25°C, Gnd Benign 200 400 kHours
Safety Standards EN 60950
Safety Class IEC 61140 Class II
www.micropowerdirect.com
   1   2