Page 1 - MPD MPM-15SV Datasheet
P. 1





MPM-15SVSeries



85 to 305 VAC Input, 15W


Miniature PC Mount

AC/DC Power Supplies



Electrical Specifi cations
Specifi cations typical @ +25°C, 230 VAC input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice.
Key Features:
Input
• 15W Output Power Parameter Conditions Min. Typ. Max. Units
• Universal 85-305 VAC Input 85 305 VAC
Input Voltage Range
• EN 60950 Approved 100 430 VDC
Input Frequency 47 63 Hz
• Class II Input
Input Current See Model Selection Guide
• Seven Single Output Models 115 VAC 10.0
Inrush Current A Pk
• Meets EN 55022 B 230 VAC 20.0
• >300 kHour MTBF Leakage Current 230 VAC/50 Hz 0.3 mA rms
• Compact PC Mount Case Output
Parameter Conditions Min. Typ. Max. Units
Output Voltage See Model Selection Guide
Output Current See Model Selection Guide
Minimum Load 0 %
Output Voltage Accuracy ±2.0 %
Line Regulation VIN = Min to Max ±0.5 %
Load Regulation See Note 2 ±1.0 %
Ripple & Noise (20 MHz) See Note 3 50 100 mV Pk - Pk
115 VAC 15
Hold-Up Time mSec
230 VAC 80
Temperature Coeffi cient ±0.02 %/°C
Short Circuit Protection Continuous (Autorecovery)
Overload Protection Autorecovery 110 %
General
Parameter Conditions Min. Typ. Max. Units
Input to Output, 60S 3,000
Isolation Voltage VAC
Input to FG, 60S 2,000
Switching Frequency 65 kHz
Environmental
Parameter Conditions Min. Typ. Max. Units
Operating Temperature Range Ambient -40 +25 +70 °C
Storage Temperature Range -40 +105 °C
Cooling Free Air Convection (See Derating Curve)
MicroPower Direct Humidity RH, Non-condensing 95 %
292 Page Street Physical
Suite D Case Size See Mechanical Diagram On Page 4
Stoughton, MA 02072 Case Material Non-Conductive Black Plastic (UL94-V0)
USA
Weight 2.99 Oz (85g)
Reliability Specifi cations
T: (781) 344-8226
F: (781) 344-8481 Parameter Conditions Min. Typ. Max. Units
E: sales@micropowerdirect.com MTBF MIL HDBK 217F, 25°C, Gnd Benign 300 kHours
W: www.micropowerdirect.com Wave Solder 260
Lead Temperature, See Note 4 °C
Hand Solder 360
Safety Standards UL 60950, EN 60950
Safety Class Class II

www.micropowerdirect.com
   1   2   3   4