Page 1 - MPD MPM-10IS Datasheet
P. 1





MPM-10IS Series



Board Mount, 10W

Single & Dual Output

AC/DC Power Supplies




Electrical Specifi cations
Key Features: Specifi cations typical @ +25°C, 230 VAC input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice.
Input
• 10W Output Power
Parameter Conditions Min. Typ. Max. Units
• Universal 85-265 VAC Input
Input Voltage Range 85 265 VAC
• EN 60950 Approved (UL)
Input Frequency 47 440 Hz
• ErP Directive Compliant Input Current See Model Selection Guide
• Meets IEC Safety Class II 115 VAC 10.0
Inrush Current A Pk
• Industry Standard Pin-Out 230 VAC 20.0
• Meets EN 55022 B EMI Meets CISPR Pub. 22/FCC Class B
• >300 kHour MTBF Output
Parameter Conditions Min. Typ. Max. Units
Output Voltage See Model Selection Guide
Output Current See Model Selection Guide
Output Voltage Accuracy ±1.0 ±2.0 %
Line Regulation VIN = Min to Max ±0.5 ±1.0 %
Load Regulation, Single Output IO = Min to Max ±0.5 ±1.0 %
Load Regulation, Dual Output IO = Min to Max ±2.5 ±5.0 %
3.3V & 5.0 VDC Output 1.5 1.8
Ripple & Noise (20 MHz) %VP-P of VO
All Other Outputs 0.8 1.0
Hold-Up Time 115 VAC, 60 Hz 20 mSec
Temperature Coeffi cient ±0.02 %/°C
Over Voltage Protection Zener Diode Clamp 120 % of VO
Short Circuit Protection, See Note 3 Continuous (Autorecovery)
Overload Protection See Note 4 105 % of INOM
General
Parameter Conditions Min. Typ. Max. Units
Isolation Voltage Input to Output 3,000 VAC
Isolation Test Voltage Input to Output, Flash Tested For 60S 4,700 VAC
Isolation Resistance 500 VDC 100 M
EMI/RFI Conducted EN 55022 Level B
Electrostatic Discharge (ESD) EN 61000-4-2 Level 3
RF Field Susceptibility EN 61000-4-3
EMC Compliance
Electrical Fast Transients/Bursts On Mains EN 61000-4-4 Level 3 2 kV
Surge EN 61000-4-5 Level 3 1kV/2 kV
Switching Frequency 100 kHz
Environmental
Parameter Conditions Min. Typ. Max. Units
Operating Temperature Range Ambient -25 +25 +71 °C
MicroPower Direct
Storage Temperature Range -40 +85 °C
292 Page Street
Suite D Cooling Free Air Convection (See Derating Curve)
Stoughton, MA 02072 Humidity RH, Non-condensing 95 %
USA Physical
Case Size 2.52 x 1.77 x 0.75 Inches (64.0 x 45.0 x 19.0 mm)
T: (781) 344-8226 Case Material Non-Conductive Plastic & Fiberglass (UL94-V0)
F: (781) 344-8481 Weight 3.23 Oz (92g)
E: sales@micropowerdirect.com Reliability Specifi cations
W: www.micropowerdirect.com
Parameter Conditions Min. Typ. Max. Units
MTBF MIL HDBK 217F, 25°C, Gnd Benign 300 kHours
Safety Standards EN 60950
Safety Class IEC 61140 Class II
ECO Design ErP Directive 2009/125/EC
www.micropowerdirect.com
   1   2