Page 1 - MPD MPM-05S Datasheet
P. 1





MPM-05S Series



Universal Input, 5W


Miniature PC Mount

AC/DC Power Supplies



Electrical Specifi cations
Specifi cations typical @ +25°C, 230 VAC input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice.
Key Features:
Input
• 5W Output Power Parameter Conditions Min. Typ. Max. Units
• Universal 85-264 VAC Input 85 264 VAC
Input Voltage Range
120 370 VDC
• EN 60950 Approved (UL)
Input Frequency 47 63 Hz
• Six Single Output Models Input Current See Model Selection Guide
• Meets EN 55022 B 115 VAC 10.0
Inrush Current A Pk
• >300 kHour MTBF 230 VAC 20.0
EMI Meets CISPR Pub. 22/FCC Class B
• Compact PC Mount Case
Safety Ground Leakage Current 230 VAC 0.3 mA
Output
The MPM-05S series is Parameter Conditions Min. Typ. Max. Units
also available with a chassis Output Voltage See Model Selection Guide
mount or DIN mount adapter. Output Current See Model Selection Guide
Please contact the factory Output Voltage Accuracy ±2.0 %
for more information
Line Regulation ±0.5 %
Load Regulation See Note 2 ±1.0 %
Ripple & Noise (20 MHz) 50 150 mV Pk - Pk
115 VAC 15
Hold-Up Time mSec
230 VAC 80
Temperature Coeffi cient ±0.02 %/°C
Short Circuit Protection Continuous (Autorecovery)
Overload Protection Autorecovery 110 %W
General
Parameter Conditions Min. Typ. Max. Units
Isolation Voltage Input to Output 3,000 VAC
Switching Frequency 140 kHz
EMI Characteristics
Parameter Conditions Min. Typ. Max. Units
Radiated Emissions See Note 3 EN 55022 Class B
Conducted Emissions See Note 3 EN 55022 Class B
ESD EN 61000-4-2 Criteria B; ±8 kV Air/±6 kV Contact
RS EN 61000-4-3 Criteria A; 10V/m
EFT See Note 4 EN 61000-4-4 Criteria B; ±2 kV
Surge See Note 4 EN 61000-4-5 Criteria B; ±1 kV/ ±2 kV
Environmental
MicroPower Direct Parameter Conditions Min. Typ. Max. Units
292 Page Street Operating Temperature Range Ambient -25 +25 +70 °C
Suite D Storage Temperature Range -25 +105 °C
Stoughton, MA 02072
USA Cooling Free Air Convection (See Derating Curve)
Humidity RH, Non-condensing 95 %
T: (781) 344-8226 Physical
F: (781) 344-8481 Case Size See Mechanical Diagram On Page 2
E: sales@micropowerdirect.com Case Material Non-Conductive Black Plastic (UL94-V0)
W: www.micropowerdirect.com Weight 1.76 Oz (50g)
Reliability Specifi cations
Parameter Conditions Min. Typ. Max. Units
MTBF MIL HDBK 217F, 25°C, Gnd Benign 300 kHours
Safety Standards UL 60950, EN 60950

www.micropowerdirect.com
   1   2