Page 1 - MPD MPM-03MM Datasheet
P. 1





MPM-03MM Series



Miniature 1 x 1 Inch


3W, Single Output

AC/DC Power Supplies



Electrical Specifi cations
Key Features: Specifi cations typical @ +25°C, 230 VAC input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice.
Input
• 3W Output Power Parameter Conditions Min. Typ. Max. Units
• Miniature 1 x 1 Inch Case Input Voltage Range 85 264 VAC
• Universal 85-264 VAC Input 120 370 VDC
Input Frequency 47 63 Hz
• EN 60950 Approved Input Current See Model Selection Guide
• Six Standard Models 115 VAC 15.0
Inrush Current, See Note 1 A Pk
• Meets EN 55022 B 230 VAC 25.0
No Load Power Consumption See Note 2 150 mW
• Meets IEC Safety Class II Output
• >1.20 MHour MTBF Parameter Conditions Min. Typ. Max. Units
Output Voltage See Model Selection Guide
Output Current See Model Selection Guide
Output Voltage Accuracy ±2.0 %
Line Regulation VIN = Min to Max ±1.0 %
Load Regulation IOUT = 0% to 100% ±1.0 %
Ripple & Noise (20 MHz) 70 m V P-P
Hold-Up Time 115 VAC 8.0 mS
Temperature Coeffi cient ±0.05 %/°C
Over Voltage Protection See Note 3 125 190 %VOUT
Overshoot 5.0 %VOUT
Short Circuit Protection, See Note 4 Continuous (Auto-Recovery)
Overload Protection See Note 5 135 150 %W
General
Parameter Conditions Min. Typ. Max. Units
Isolation Voltage Input to Output, 60S 3,000 VAC
Isolation Resistance 500 VDC 100 M
Switching Frequency 65 kHz
EMI Characteristics
Parameter Standard Criteria Level
Radiated Emissions EN 55014, EN 55024 Class B
Conducted Emissions EN 55022 Class B
ESD EN 61000-4-2 A ±8 kV Air
RS EN 61000-4-3 A 10V/m
EFT EN 61000-4-4 A ±2 kV
Surge EN 61000-4-5 A ±1 kV
CS EN 61000-4-6 A 10 Vrms
PFM EN 61000-4-8 A 30A/m
Voltage Dips EN 61000-4-11 A 30% 10 mS
Interruptions EN 61000-4-11 B 95% 5,000 mS
MicroPower Direct Environmental
292 Page Street Parameter Conditions Min. Typ. Max. Units
Suite D Operating Temperature Range Ambient -25 +25 +70 °C
Stoughton, MA 02072 Storage Temperature Range -40 +85 °C
USA Cooling Free Air Convection (See Derating Curve on Page 2)
Humidity RH, Non-condensing 95 %
T: (781) 344-8226 Physical
F: (781) 344-8481 Case Size See Mechanical Diagram (Page 2)
E: sales@micropowerdirect.com Case Material Non-Conductive Black Plastic (UL94-V0)
W: www.micropowerdirect.com Weight 0.59 Oz (17.4g)
Reliability Specifi cations
Parameter Conditions Min. Typ. Max. Units
MTBF MIL HDBK 217F, 25°C, Gnd Benign 1.20 MHours
Safety Standards EN 60950
Safety Class IEC 60536 Class II
w www.micropowerdirect.com
www.micropowerdirect.comww.micropowerdirect.com
   1   2