Page 1 - MPD MPM-02V Datasheet
P. 1





MPM-02V Series



Ultra Wide Input, 2W


Miniature, Board Mount

AC/DC Power Supplies



Electrical Specifi cations
Specifi cations typical @ +25°C, 230 VAC input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice.
Key Features:
Input
• 2W Output Power Parameter Conditions Min. Typ. Max. Units
• Universal 85-305 VAC Input Input Voltage Range 85 305 VAC
120 430 VDC
• EN 60950 Approved (UL)
Input Frequency 47 63 Hz
• Meets IEC Safety Class II Input Current See Model Selection Guide
• -25ºC to +70ºC Operation 110 VAC 5.0
Inrush Current A Pk
230 VAC 11.0
• Single Regulated Output
Leakage Current 110/230 VAC 0.15 mA
• >300 kHour MTBF Output
• Ultra-Miniature DIP Case Parameter Conditions Min. Typ. Max. Units
Output Voltage See Model Selection Guide
Output Current See Model Selection Guide
Output Voltage Accuracy See Note 1 ±5.0 %
Line Regulation VIN = Min to Max ±2.0 %
Load Regulation See Note 2 ±5.0 %
Ripple & Noise (20 MHz) 100 200 mV Pk - Pk
115 VAC 30
Hold-Up Time mSec
230 VAC 140
Temperature Coeffi cient ±0.02 %/°C
Short Circuit Protection Continuous (Autorecovery)
Over Current Protection >110% With Autorecovery
General
Parameter Conditions Min. Typ. Max. Units
Isolation Voltage Input to Output 3,000 VAC
Conducted CISPR22/EN 55022 Level B
EMI/RFI, See Note 3
Radiated CISPR22/EN 55022 Level B
Electrostatic Discharge (ESD) EN 61000-4-2 Level B 4 kV/8 kV
RF Field Susceptibility EN 61000-4-3 Level A 10V/m
Electrical Fast Transients/Bursts On Mains EN 61000-4-4 Level B 2 kV
EMC Compliance Surge EN 61000-4-5 Level B 1 kV/2 kV
CS EN 61000-4-6 Level A 10V rms
PFM EN 61000-4-8 Level A 10A/m
Volt. Dips, Short & Inter. Immunity EN 61000-4-11 Level B 0 - 70%
Switching Frequency 100 kHz
Environmental
Parameter Conditions Min. Typ. Max. Units
MicroPower Direct
Operating Temperature Range Ambient -25 +25 +70 °C
292 Page Street
Suite D Storage Temperature Range -40 +85 °C
Stoughton, MA 02072 Cooling Free Air Convection (See Derating Curve)
USA Humidity RH, Non-condensing 90 %
Physical
T: (781) 344-8226 Case Size 1.327 x 0.874 x 0.708 Inches (33.7 x 22.2 x 18.0 mm)
F: (781) 344-8481 Case Material Non-Conductive Black Plastic (UL94-V0)
E: sales@micropowerdirect.com Weight 0.70 Oz (20g)
W: www.micropowerdirect.com
Reliability Specifi cations
Parameter Conditions Min. Typ. Max. Units
MTBF MIL HDBK 217F, 25°C, Gnd Benign 300 kHours
Safety Approvals UL 60950, EN 60950
Safety Class IEC 61140 Class II
www.micropowerdirect.com
   1   2