Page 1 - MPD - MPL-01SEUP Datasheet
P. 1





MPL-01SEUPSeries



Open, Single Output,


Ultra-Miniature SIP, 1W

AC/DC Power Supplies



Key Features: Electrical Specifi cations
Specifi cations typical @ +25°C, 230 VAC input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice.
• 1W Output Power
Input
• Open, Ultra-Miniature SIP
Parameter Conditions Min. Typ. Max. Units
• Universal 85-305 VAC Input 85 305 VAC
Input Voltage Range, See Note 1
• EN 60950 Approved 70 430 VDC
• Meets IEC Safety Class II Input Frequency 47 63 Hz
Input Current See Model Selection Guide
• Single Regulated Output
115 VAC 9.0
• Meets EN 55022 Inrush Current A Pk
277 VAC 15.0
• >200 kHour MTBF
Output
• Avail. With Right Angle Pins Parameter Conditions Min. Typ. Max. Units
• Low, Low Cost! Output Voltage Accuracy See Model Selection Guide
24 VDC Output 0.20 0.30 W
Standby Power Consumption
All Other Models 0.15 0.25
Line Regulation VIN = MIN to MAX ±1.5 %
Load Regulation IOUT = 5% to 100% ±2.5 %
Ripple & Noise (20 MHz) 50 120 mV P-P
Hold-Up Time 230 VAC 150 180 msec
Temperature Coeffi cient ±0.15 %/°C
Over Current Protection Autorecovery 110 500 %IOUT
Short Circuit Protection Continuous (Autorecovery)
General
Parameter Conditions Min. Typ. Max. Units
Isolation Voltage Input to Output, 60 Sec 3,000 VAC
Switching Frequency 100 kHz
EMI Characteristics
Parameter Standard Criteria Level
Radiated Emissions, See Note 3 EN 55022 Class B
Conducted Emissions, See Note 3 EN 55022 Class B
ESD EN 61000-4-2 B ±4 kV Contact
RS, See Note 4 EN 61000-4-3 A 10V/m
EN 61000-4-4 B ±2 kV
EFT, See Note 5
EN 61000-4-4 B ±4 kV
Surge, See Note 6 EN 61000-4-5 B ±1 kV /±2 kV
CS, See Note 7 EN 61000-4-6 A 10 Vrms
Voltage Dips EN 61000-4-11 B 0% - 70%
Environmental
Parameter Conditions Min. Typ. Max. Units
Operating Temp Range, See Note 1 Ambient -40 +25 +85 °C
MicroPower Direct Storage Temperature Range -40 +105 °C
292 Page Street Cooling Free Air Convection (See Derating Curve)
Suite D Humidity RH, Non-condensing 85 %
Stoughton, MA 02072 Physical
USA Case Size See Mechanical Drawings (Page 3)
Case Material Conformal Coating (UL94-V0)
T: (781) 344-8226 Weight 0.24 Oz (6g)
F: (781) 344-8481 Wave Soldering (5 - 10s) 255 260 265
E: sales@micropowerdirect.com Solder Temperature °C
W: www.micropowerdirect.com Manual Soldering (3 - 5s) 350 360 370
Reliability Specifi cations
Parameter Conditions Min. Typ. Max. Units
MTBF MIL HDBK 217F, 25°C, Gnd Benign 200 kHours
Safety Standards UL 60950, EN 60950
Safety Class IEC 61140 Class II
w
www.micropowerdirect.comww.micropowerdirect.comwww.micropowerdirect.com
   1   2   3